Aircraft Engine Historical Society, Inc.
Found in 593 Collections and/or Records:
"Hydrodynamic Properties of Planing Surfaces and Flying Boats" [Translation of paper titled "Materialy po Gidrodinamicheskomu Raschetu Glisserov i Gidrosamoletov" by N. A. Sokolov] (NACA Technical Memorandum 1246), 1932, 1950-10
Document Type: Technical Research Report (Translation).
Purpose: Authoritative reference
Authority: Government Civil
Document Number: NACA Technical Memorandum 1246, dated October 1950. Originally published as CAHI [Central Aerohydrodynamic Institute] Report No. 149, 1932, pp. 1-59.
Scope: Translation of academic paper titled "Materialy po Gidrodinamicheskomu Raschetu Glisserov i Gidrosamoletov" by N. A. Sokolov.
Contents: See title.
"Hydrodynamic Tests of a 1/10-size Model of the Hull of the Latécoère 521 Flying Boat – NACA Model 83" (NACA Technical Notes No. 836), 1941-12
Document Type: Technical Research Report.
Purpose: Authoritative reference
Authority: Government Civil
Document Number: NACA Technical Note 836, dated December 1941.
Scope: Preliminary NACA research report by Roland E. Olson and Lindsay J. Lina of Langley Memorial Aeronautical Laboratory, Langley Field, Va.
Contents: See title.
IFR Pilot Exam-O-Grams: A Complete Set of FAA Exam-O-Grams for IFR Flight
Document Type: Training Material (Study).
Purpose: Training & Education.
Authority: Commercial (Services).
Scope: TBD
Contents: TBD
"Impact Test of a JN-4 Tail Skid and Landing Chassis" (Air Service Information Circular (Aviation) Vol. V, No. 409), 1922-09-19, 1923-04-01
Document Type: Technical Research Report
Authority: Government Military (authoritative reference)
Document Number: Air Service Information Circular (Aviation) Vol. V, No. 409 (dated April 1, 1923), based on McCook Field Report Serial No. 2018 (dated September 19, 1922).
Scope: Report prepared by D. B. Weaver of the Airplane Section, Engineering Division, Air Service, McCook Field.
Contents: See title. Test was done with a non-flyable JN-4.
Inclined Lettering For Mechanical and Machine Drawing, 1932
Includes all series materials located in the UAH Special Collection section and cataloged in the UAH Library catalog.
"Induced Interference effects on a Four-Jet VTOL Configuration with Various Wing Planforms in the Transition Speed Range" (NASA Technical Note TN D-1400), 1962-09
Document Type: Technical Research Report.
Purpose: Authoritative reference
Authority: Government Civil
Document Number: NASA Technical Note TN D-1400, dated September 1962.
Scope: Preliminary NASA research report by James H. Otis, Jr. of Langley Research Center, Langley Station, Hampton, Va.
Contents: See title.
"Inertia Forces in 8-Cylinder Engines" (Bulletin of the Airplane Engineering Department, U.S.A, Vol. I, No. 3), 1918-08
Instruction Manual for Curtiss Electric Propellers: Section 11, Aluminum Alloy Blade Propeller (Three Blade), 1941-10, 1943-03
Document Type: Instruction Manual.
Authority: Manufacturer (authoritative directive)
Contents include chapters on: 1. Operation and Description, 2. Installation, 3. Maintenance and Lubrication Instructions, 4. Removal and Disassembly, 5. Inspection and Parts Replacement, 6. Assembly, 7. Balancing and 8. Operational Inspection
Instruction Manual for Curtiss Electric Propellers: Section 12, Hollow Steel Blade Propeller (Three Blade), 1941-08, 1943-04
Document Type: Instruction Manual
Authority: Manufacturer (authoritative directive)
Contents include chapters on: 1. Operation and Description, 2. Installation, 3. Maintenance and Lubrication Instructions, 4. Removal and Disassembly, 5. Inspection and Parts Replacement, 6. Assembly, 7. Balancing and 8. Operational Inspection
Instruction Manual for Curtiss Electric Propellers: Section 15, Hollow Steel Blade Propeller (Four Blade), 1942-03, 1943-05
Document Type: Instruction Manual
Authority: Manufacturer (authoritative directive)
Contents include chapters on: 1. Operation and Description, 2. Installation, 3. Maintenance and Lubrication Instructions, 4. Removal and Disassembly, 5. Inspection and Parts Replacement, 6. Assembly, 7. Balancing and 8. Operational Inspection
