Continental Motors Corporation. Aircraft Engine Division
Organization
Biography
Locale: Muskegon, Michigan
Found in 3 Collections and/or Records:
Continental Operators Handbook (A50 Series 4 & 5, A65 Series 1 & 3, A75 Series 3), 1939-06-15
Item — Box 096, Folder: 002
Identifier: 20210014
Scope and Contents
Document Type: Operators Handbook and Manual
Authority: Manufacturer (authoritative directive)
Document Number: AV8Special Note on page 2: “This Operators Handbook and Table of Fits and Clearances combines in one unit engines; A50 Series 4 and 5, A65 Series 1 and 3 and A75 Series 3, and therefore cancels and supersedes all previous instructions and clearance data which may have been published or issued on the above engines.”Contents: Warranty, Continental...
Dates:
Publication: 1939-06-15
Maintenance and Overhaul Manual With Spare Parts Catalog (Models A50, A65, A75, A80 Continental Aircraft Engines), 1948-02-15
Item — Special collection MC-19, Book: 091, Book: Catalog Number: TBD
Identifier: 20210013
Scope and Contents
Document Type: Manual with Illustrated Parts CatalogDocument Number: Form A-A40From the Introduction: This book is a combined Operator's Manual, Maintenance and Overhaul Manual and Illustrated Parts and Price List for the Continental A50, A65, A75, and A80 series 8 and 9 engines. This manual is intended for use by operators and mechanics as a guide and reference book in the operation and servicing of these engines. The book is...
Dates:
Publication: 1948-02-15
Operator's Handbook: A and C Series 4 cyclinder Continental Red Seal Aircraft Engines for your Piper Airplane, Circa late 1930s-early 1940s
Item — Box 096, Folder: 003
Identifier: 20212020
Scope and Contents
Document Type: Operators Handbook
Authority: Manufacturer (authoritative directive)Note under "Service": "The engines described in this Handbook are of similar design and construction, their differences being in accessory drives, piston size, etc. Cylinders of aluminum heads and steel barrels are individually assembled to crankcase. Provisions are made for a Starter, Fuel Pump, Fuel Injector, and Oil Cooler on all "A" series en-gines. Provisions are made on all "C" series engines...
Dates:
Publication: Circa late 1930s-early 1940s